Simplify your micro-irrigation installation with the Antelco eZyvalve 4 Kit. Four internal solenoid valves are housed in a compact, pre-assembled box, helping you distribute water to separate garden zones without building an internal pipe manifold. Choose the model that matches your irrigation controller: 24V ac or 9V dc latching.
Key Features
Four-zone control: Manage up to four watering zones for drippers, sprays and micro sprinklers.
Pre-assembled construction: No internal pipe connections to assemble.
Outdoor durability: High-strength, UV-stabilised materials with water, dust and pest resistance.
Secure access: Textured non-slip lid with an O-ring seal and stainless steel screws.
Installation essentials: Cable seal and wire connectors included.
Flexible positioning: Suitable for above-ground or below-ground installation.
Available Configurations
24V ac Solenoids – Order Code 16605
For connection to a compatible 24V ac irrigation controller. Operating pressure: 20–1250 kPa. Electrical specification: 320 mA inrush and 260 mA holding current at 50 Hz. Approximate unit weight: 1075 g.
9V dc Latching Solenoids – Order Code 16625
For connection to a compatible four-station battery-powered DC irrigation controller. Operating pressure: 20–750 kPa. Electrical specification: 9V dc with 1200 mA inrush current. Approximate unit weight: 1150 g.
Technical Specifications
Internal valves: Four solenoid valves.
Flow range: 1–30 L/min per valve.
Ambient temperature: 2–60°C.
Inlet: 3/4-inch BSP male tapered thread.
Outlets: Four 3/4-inch BSP male parallel threads.
Packaged dimensions: 105 × 182 × 182 mm, as listed in the manufacturer's catalogue.
Manufacture: Made in Australia.
Pressure-Loss Reference
10 L/min: 30 kPa.
15 L/min: 63 kPa.
20 L/min: 108 kPa.
25 L/min: 165 kPa.
30 L/min: 231 kPa.
Ideal For
Landscape irrigation, home gardens, greenhouses and nurseries where several micro-irrigation zones need a compact valve arrangement.
Controller and Accessory Requirements
Select the correct electrical model for your controller. The valve box requires an external compatible irrigation controller. 1000 mm braided hose with 3/4-inch BSP female connections, and 1-inch BSP female to 3/4-inch BSP male tap adaptor, are available separately as accessories, not standard kit inclusions. Controllers, external pipework and irrigation emitters shown in installation illustrations are not listed as kit contents. For a non-potable water supply, the manufacturer recommends a filtration device. Follow applicable plumbing and electrical installation requirements.
